@article {154296,
	title = {Eutectic gallium-indium (EGaIn): A liquid metal alloy for the formation of stable structures in microchannels at room temperature},
	journal = {Advanced Functional Materials},
	volume = {18},
	number = {7},
	year = {2008},
	pages = {1097-1104},
	abstract = {This paper describes the rheological behavior of the liquid metal eutectic gallium-indium (EGaIn) as it is injected into microfluidic channels to form stable microstructures of liquid metal. EGaIn is well-suited for this application because of its theological properties at room temperature: it behaves like an elastic material until it experiences a critical surface stress, at which point it yields and flows readily. These properties allow EGaIn to fill microchannels rapidly when sufficient pressure is applied to the inlet of the channels, yet maintain structural stability within the channels once ambient pressure is restored. Experiments conducted in microfluidic channels, and in a parallel-plate rheometer, suggest that EGaIn{\textquoteright}s behavior is dictated by the properties of its surface (Predominantly gallium oxide, as determined by Auger measurements); these two experiments both yield approximately the same number for the critical surface stress required to induce EGaIn to flow (similar to 0.5 N/m). This analysis-which shows that the pressure that must be exceeded for EGaIn to flow through a microchannel is inversely proportional to the critical (i.e., smallest) dimension of the channel-is useful to guide future fabrication of microfluidic channels to mold EGaIn into functional microstructures.},
	url = {https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.200701216},
	author = {Dickey, Michael D. and Chiechi, Ryan C. and Larsen, RyanJ. and Weiss, Emily A. and Weitz, David A and George M. Whitesides}
}
